Switch Management
View the port and network topology information of switches. You can also perform operations such as device setup and upgrade.
Tap on a project in the project list to view project details. Tap Network to view the switch information.
- Device list: View all/online/offline switches. You can search devices by device name and serial number. Tap > for the device to view Device Details.
- Device Topology: View switch's network topology.
- Supports gesture operations: Use two fingers to pinch open/close to zoom out/in topology; use one finger to move the position of the topology.
- Tap on an switch icon on the topology to view Device Details.



Port Information
View the port information such as port list, running status, uplink speed, downlink speed, and PoE power usage.
Port Icon Description
- Port type: copper port; optical port; uplink port.
- Port status: up; down; error; PoE power supply.
Restart Port
In the port list, tap Restart for the port to restart the port's PoE power supply.
Port Details
In the port list, tap on a port information to view port details.
- View the type of the connected device (IPC/NVR/Switch/Unknown), device model, and device IP address.
- Tap the icon to enable/disable the port and PoE. You can also set the port speed and duplex mode.
- Tap Restart PoE to restart the port's PoE power supply.

Device Setup
- Device name: Tap > to edit the device name.
- Firmware upgrade: For online devices, the system can detect the device's latest version automatically.
- If already the latest version, tap Latest Version to view the current version information.
- If a new version is available, tap Upgrade to view the current and the latest version. You can upgrade the device version by following the on-screen instructions.
- Restart device: Tap Restart Device to restart the switch.
- Delete device: Tap Delete Device to delete the device from the app.
Device Topology
View the connected devices of each port in topology.
- Supports gesture operations: Use two fingers to pinch open/closed to zoom out/in on the topology; use one finger to move the topology.
- Tap the icon in the upper right corner to refresh the topology.
Guard Live Docs